Posts Tagged ‘ makueni county ’

Kilome dryland’s new Users

They don’t understand maize & beans, they also don’t see lack of banks, dams & boreholes as an impediment to their agricultural endeavours. Infact one of them said No to an order to his produce as I enquired to write about his farming without a dam,borehole or river source
image

..when everything around is crisp brown!
image
their gardens are full of fruit! But even better, they are more than willing to show their keen how to do it.

Text & Images
©Muoki Kioko 2009-2014
email: muokikioko@gmail.com

Cassava crunchies in Kilome – value addition part3

Orange cassava crunchies
image

image

Cassava ovacado bite

image

Cassava onion bite
image

Cassava tomato crunchy

image

*subscribe below to get notification of cassava industrial processes, how every part of cassava plant is used, machinery (Affordable) & industry products you can make locally in rural kenya

Copyright Reserved
All images and Text
Muokikioko@gmail.com
2009 – 2014
*Subscribe at the bottom of this page to receive email notifications of new articles

Inside Kilome – Salama

 

salama market

Located on Mombasa – Nairobi Highway is this Centre that’s also a beautiful market place cum stop for anyone wishing to stop and stretch from their drive from Mombasa. ie. ideally a place you’d want to stretch before your last leg to Nairobi. Just 100Kms from Nairobi it’s got a large paved parking which can serve well as a point to regroup when traveling from Nairobi headed to the Southern National parks [Amboseli NP & Tsavo NP] or when headed to the coast as a group.

Easily recognizable by the Mosque and Kilome/Nunguni hills in the Background. On Market days you will get a lot of local products from the region (depending on season) like Cassava, banana’s, promagranets(Makukumanga), mangoes, water melons.

Said to have developed on the Directive of Kenya’s first president ‘Jomo Kenyatta’ as a safe market to trade in after the previous market located slightly inland became inconvenient for traders as they disagreed with locals. He is said to have told the traders he will give them pahali Salama- thus the Name.
Interesting places to visit nearby Includes This waterfall

Oil (please don’t come prospecting here)

History

• 3000 BC Sumerians used asphalt as an adhesive while Eqyptians use pitch to grease chariot wheels, and Mesopotamians use bitumen to seal boats

• 600 BC Confucius writes about drilling a 100’ gas well and using bamboo for pipes

• 1500 AD Chinese dig oil wells >2000’ deep

• 1847 First “rock oil” refinery in England

• 1849 Canada distills kerosene from crude oil

• 1856 World’s first refinery in Romania

• 1857 Flat-wick kerosene lamp invented

• 1913 Gulf Oil opens first drive-in filling station

 

Samuel M. Kier, a native of southwestern Pennsylvania, was the first person to refine crude oil. In the mid-1840s, he became aware of crude oil through his salt business. Occasionally, wells drilled for salt water would produce foul-smelling petroleum alongside the brine. For many in the salt business, the oil was a nuisance, and they were content to burn it or allow it to run off into nearby waterways. However, Kier was an entrepreneur, and he believed that he could turn the oily by-product of his salt wells into something of value.

Kier first used the flammable oil produced by his salt wells to light his salt works at night. The burning crude produced an awful smell and a great deal of smoke. Nevertheless, Kier was able to light his business without paying for an expensive illuminant like whale oil. Next, Kier packaged pure crude oil in half-pint bottles for sale as a medicine. A bottle of Kier’s Petroleum sold for 50 cents.

 

First Attempts Attempts at commercializing Oil

Kier knew crude oil would burn and thought that it could make a good and inexpensive lamp oil. However, the smell and smoke that burning oil produced made it hard to sell as an illuminant. In 1849, Kier took samples of his crude oil to Philadelphia where they were analyzed by Professor James C. Booth, a chemist. Booth agreed that crude oil could be used for illumination, but that it needed to be distilled or refined to get the best burning fluid. Thus, in 1850, Kier started experimenting with distillation and became the first person in the U.S. to attempt to use liquid petroleum as a starting material to produce lamp oil. His refining experiments were successful and by 1851, Kier produced a product called Carbon Oil, a fuel oil which burned with little smoke and odor. He sold his Carbon Oil for $1.50 a gallon.

In partnership with John T. Kirkpatrick, Kier created the first U.S. petroleum refinery in Pittsburgh, Pennsylvania

EARLY REFINERIES

In the early days of the oil industry, the methods for refining oil were very different than the methods we use today. People like Samuel M. Kier used horizontal cylindrical stills that only held 5 to 6 barrels of oil at a time. Using the stills, refiners were able to raise the temperature of the oil very slowly. As the temperature rose, they removed the distillates like gasoline for which they had no use, procuring only the lamp oil or kerosene

 

 

MODERN REFINING(fractional distillation).

This process separates the different components of crude oil so that they can be further refined.

Just as water goes from liquid to vapour at approximately 100°C, each type of hydrocarbon changes from liquid to vapor within a specific temperature range. In general, the more carbons in a molecule, the higher its boiling point. This allows for separation within the distilling process.

Fractional distillation begins when the crude oil, which is a mixture of different hydrocarbons, is put into a high-pressure steam boiler. This is a tank that makes the oil boil and turn to vapor, much like boiling water turns into water vapor. The crude oil is heated to temperatures up to 600° Celsius.

After the oil becomes vapor, it enters the bottom of the distillation column through a pipe. The distillation column is a tall tank that contains many plates or trays. The vapor rises in the column, cooling as it rises. The specific vapors cool at their boiling points and condense on the plates or trays in the column. Much like water condensation on the outside of a cold glass, the vapors turn into liquid fractions as they condense. The liquid fractions flow through pipes and are collected in separate tanks. The fractions include gases, naphtha, gasoline, kerosene, diesel fuel, lubricating oils, heavy oils, and other materials.

CRUDE OIL

There are different grades of crude oil, each with a specific composition determined by the original decomposed source materials as well as the properties of  the surrounding soil or rock formations. It can be light or heavy (referring to density) and sweet or sour (referring to its sulfur content).

 

OIL PRODUCTS

Asphalt

Asphalt is commonly used to make roads. It is a colloid of asphaltenes and maltenes that is separated from the other components of crude oil by fractional distillation. Once sphalt is collected, it is processed in a de-asphalting unit, and then goes through a process called “blowing” where it is reacted with oxygen to make it harden. Asphalt is usually stored and transported at around 148.9° Celsius.

Diesel

Diesel is any fuel that can be used in a diesel engine. Diesel is produced by fractional distillation between 200° Celsius and 350° Celsius. Diesel has a higher density than gasoline and is simpler to refine from crude oil. It is most commonly used in transportation.

Fuel Oil

Fuel oil is any liquid petroleum product that is burned in a furnace to generate heat. Fuel oil is also the heaviest commercial fuel that is produced from crude oil. The six classes of fuel oil are: distillate fuel oil, diesel fuel oil, light fuel oil, gasoil, residual fuel oil, and heavy fuel oil. Residual fuel oil and heavy fuel oil are known commonly as navy special fuel oil and bunker fuel; both of these are often called furnace fuel oil.

Gasoline

Almost half of all crude oil refined in the United States is made into gasoline. It is mainly used as fuel in internal combustion engines, like the engines in cars. Gasoline is a mixture of paraffins, naphthenes, and olefins, although the specific ratios of these parts depends on the refinery where the crude oil is processed. Gasoline refined beyond fractional distillation is often enhanced with iso-octane and ethanol so that it is usable in cars.

Gasoline is called different things in different parts of the world. Some of these names are: petrol, petroleum spirit, gas, petrogasoline, and mogas.

Kerosene

Kerosene is collected through fractional distillation at temperatures between 150° Celsius and 275° Celsius. It is a combustible liquid that is thin and clear. Kerosene is most commonly used as jet fuel and as heating fuel. In the early days of oil, kerosene replaced whale oil in lanterns. In the early 21st century, kerosene was used to power New York City Transit buses. Now, kerosene is used as fuel in portable stoves, kerosene space heaters, and in liquid pesticides.

Liquefied Petroleum Gas

Liquefied petroleum gas is a mixture of gases that are most often used in heating appliances, aerosol propellants, and refrigerants. Different kinds of liquefied petroleum gas, or LPG, are propane and butane. At normal atmospheric pressure, liquefied petroleum gas will evaporate, so it needs to be contained in pressurized steel bottles.

Lubricating Oil

Lubricating oils consist of base oils and additives. Mineral oils are manufactured by special processes called: solvent extraction, catalytic dewaxing, hydrocracking, and isohydromerization. Different lubricating oils are classified as paraffinic, naphthenic, or aromatic. Lubricating oils are used between two surfaces to reduce friction and wear.

 

.

BARREL OF CRUDE OIL PRODUCES (Product Gallons per Barrel)

Gasoline 19.4

Distillate Fuel Oil 9.7 (Includes both home heating oil and diesel fuel)

Kerosene-Type Jet Fuels 4.3

Coke 2.0

Residual Fuel Oil 1.9 (Heavy oils used as fuels in industry, marine transportation, and for electric power generation)

Liquefied Refinery Gases 1.9

Still Gas 1.8

Asphalt and Road Oil 1.4

Petrochemical Feedstocks 1.1

Lubricants 0.5

Kerosene 0.2

Other 0.4

(Source: API)

most commonly-known lubricating oil is motor oil, which protects moving parts inside an internal combustion engine.

Paraffin Wax

Paraffin wax is a white, odorless, tasteless, waxy solid at room temperature. The melting point of paraffin wax is between 42.2° C and 63.9° C, depending on other factors. It is an excellent electrical insulator, second only to Teflon®, a specialized product of petroleum. Paraffin wax is used in drywall to insulate buildings. It is also an acceptable wax used to make candles for the Jewish Menorah.

Bitumen

Bitumen, commonly known as tar, is a thick, black, sticky material. Refined bitumen is the bottom fraction obtained by the fractional distillation of crude oil. This means that the boiling point of bitumen is very high, so it does not rise in the distillation chamber. The boiling point of bitumen is 525° C. Bitumen is used in paving roads and waterproofing roofs and boats. Bitumen is also made into thin plates and used to soundproof dishwashers and hard drives in computers.

Petrochemicals

Petrochemicals are the chemical products made from the raw materials of petroleum. These chemicals include: ethylene, used to make anesthetics, antifreeze, and detergents; propylene, used to produce acetone and phenol; benzene, used to make other chemicals and explosives; toluene, used as a solvent and in refined gasoline; and xylene is used as a solvent and cleaning agent.

NB:

crude oil is the starting point for many diverse products such

–       clothes, threads, straps, shoe laces, plastic shoes, sandles, soles

–       medical  equipment,

–       electronics, plastics, cable coating, plastic casings

–       vitamin capsules, mask covers, medical gloves

–       tires, tubes, wheel burrow wheels, toy car wheels, trolley wheels

The 100mtr waterfall of Ukambani

Situated on Ka Kindui river on Kilome hills Makueni County is ‘Ka kindui waterfalls’ – An adventure at viewing of waterfalls 🙂

image

In 6 steps, It starts with this first fall about 15 metres drop just off the main road. Then

image

another 10metre drop with an adventure filled path to see it (locals make trips to marvel at it).

image

Above is step 3 of the waterfall (your adrenaline will by now have been pushed up 4 notches to get here).
Next is for the ‘Dare Devils’ – a 30-40metre verticle drop. To get here you’ll definitely be on ALL 4’s

image

…followed by two others of similar vertical drop. I love heights, even then at this stage my legs were wobbling!
Have a joyous Christmas season and keep enjoying exploring Kilome.

To share on your Facebook page click on Facebook button below. Same applies to LinkedIn and twitter.

*Sorry, to get there(from Nairobi) 100kms down mombasa road turn left at salama and proceed 14kms on tarmac to ‘kyale’. Here you’ll find a Catholic church to your right (after Kilome shops but before Nunguni). Turn right into an all weather road for about 7kms, ask locals for road along ka kindui river and keep at it till you get to hill edge. The fall is just off the road. I couldn’t keep details of the route as I was hiking (A never ending rd back to the main road)
Where to stay:click here
Enjoy the adventure 🙂

– note this is at a forested edge and can be slippery descending, please wear appropriate shoes. The other view is kilometers away accessible through kati komu planned for another day to take a complete image of whole waterfall.

Text & Images
©Muoki Kioko 2009-2013
For permissions to use images email: muokisphotography@yahoo.com

*Subscribe at the bottom of this page to receive email notifications of new articles

Quail breeding for Kilome

image

The Japanese Quail is the most commonly breed quail for eggs and meat. With wholesale prices standing at a minimum 20/= an egg in Kenyan market making it higher than prices for chicken eggs it makes it an ideal farming alternative for Kilome women and youth.
They are easy to keep in pens similar to rabbit pens with a ratio of 1 male to 3 female recommended to avoid fighting as they are very territorial.
Feeding requirements are minimal as a chick/hen will consume 20-25grms daily, and feed may include sunflower, corn, millet, linseed and greens.Commercial chicken feeds are also used.
For eggs chicks will mature at 6 weeks, while for meat at 12-14 weeks and With appropriate conditions ie light & warmth chicks will lay daily for about 2 years (an egg a day) peaking at about 50weeks. Warmth of ukambani is ideal plus our long daylight hours, though on dull days light may be supplimented with a light bulb.
To breed, they seat on 6-12 eggs for 12-13days and can fly in 2 weeks with average 10 surviving.

Why are quail eggs pricier?
– They have a higher yolk to white ratio making them tastier than chicken eggs with a more gummy feel when chewing.
– they’re being used by HIV patients because they have celenium that helps protect cells from damage.
– cancer patients are also said to be using them during chemotherapy to reduce effects of chemotherapy sessions on body thus allowing them continue daily life immediately after chemo sessions.
– the eggs have 5.5% of daily value of ‘Reboflavin’/vitamin B2 required by human bodies daily. This is used to treat cervical cancer, acne, muscle crumps, blood disorders, fatigue, cataracts and glaucoma.
Fertilized eggs for starting stocks are ranging 80/= to 450/= depending on availability
A breeder license form can be acquired from http://www.kws.org/export/sites/kws/misc/downloads/Quail-bird_application_form.pdf

Text & Images
©Muoki Kioko 2009-2013
For permissions to use images email: muokisphotography@yahoo.com

*Subscribe at the bottom of this page to receive email notifications of new articles

Kamba cultural items in Kilome

KIIKO KYA ISYO(spoon for serving maize n beans meal)

image

image

Kiiko kya mboka(spoon for serving stew)

image

Mwiko wa kuua na kwoko kumwe(‘stick’ for cooking Ugali/maizemeal using one hand)

image

Kisiko kya kana(a childs spoon)

image

image

Kivila kya Muumbo(3 legged stool for young ones)

image

image

Ndata ya Mzee(Mzee’s walking stick)

image

Thoome

image

See more on https://kilome.wordpress.com/

To experience this cultural tour or purchase any of these items made or even see how they are made and used: contact Mzee Matheka +254717049040